Super G Wireless Router WGT624 v4 User Manual
Setting Up WPA-PSK or WPA2-PSK
To set up WPA-PSK or WPA2-PSK wireless security for the WGT624 v4 wireless router:
1. On the main menu, below the Setup heading, select Wireless Settings.
Figure 2-5
2. Select the security option that you want to use:
•
WPA-PSK [TKIP]. Only computers or devices that use WPA-PSK [TKIP] will be able to
connect to the router. WPA2-PSK [AES] devices cannot connect.
•
WPA2-PSK [AES]. Only computers or devices that use WPA2-PSK [AES] will be able to
connect to the router.WPA-PSK [TKIP] devices cannot connect.
•
WPA-PSK [TKIP] + WPA2-PSK [AES]. This option is recommended, since it is
compatible with a greater number of computers and devices.
3. Enter a word or group of 8-63 printable characters in the Passphrase field.
4. Click Apply to save your settings.
Tip: If you were connected wirelessly to the router, you lost the wireless connection
when you clicked Apply.Change the wireless security settings for your
computer to match the router settings. Then you will be able to connect to the
router.
2-10
v1.0, July 2008
Wireless Security