Radio Shack ET-551 Owner's Manual page 7

43-1051.fm Page 7 Tuesday, August 17, 1999 1:08 PM
2. Insert the
adapter's barrel plug into the
jack on the back of the base.
12V
3. Route the modular cord through
the groove on the bottom of the
base and the
through the strain relief slot on top
of the base.
Strain Relief Slot
supplied power
DC
adapter cord
Groove
4. Plug the adapter into a standard
AC outlet.
5. Plug the short modular cord's
other end into the wall plate jack,
then align the base's keyhole slots
with the wall plate studs and slide
the base downward to secure it.
6. Fully extend the base's antenna
and place it in a vertical position.
7