Connecting The Base - Radio Shack ET-2101 Owner's Manual

43-2101.fm Page 10 Wednesday, February 23, 2000 9:12 AM

CONNECTING THE BASE

You can power the base using the supplied 12V, 300-mA AC
adapter.
Cautions:
You must use a Class 2 power source that sup-
!
plies 12V DC and delivers at least 300 mA. Its
center tip must be set to positive and its plug
must fit the phone's
that does not meet these specifications could damage the
phone or the adapter.
• Always connect the AC adapter to the base before you
connect it to AC power. When you finish, disconnect the
adapter from AC power before you disconnect it from the
base.
Follow these steps to connect the base to a phone line and AC
power.
1. Plug one end of the supplied
modular cord into the
jack.
2. Plug the modular cord's other
end into a modular phone line
jack.
3. Plug the supplied AC adapter's
barrel plug into the
.
300mA
10
jack. Using an adapter
DC12V 300mA
TEL LINE
TEL LINE
DC 12V
Preparation
DC 12V 300mA