Storing A Caller Id Record To Memory; Deleting Caller Id Records - Radio Shack ET-1126 Owner's Manual

43-1126.fm Page 21 Thursday, April 27, 2000 11:23 AM
Storing a Caller ID Record to
Memory
Follow these steps to store the name and
number from a Caller ID record into a memo-
ry location.
1. Press then
CALL ID
recall the record you want to store.
2. If you want to add or delete the area
code, press .
3
3. Press .
MEM Select
appears.
4. Choose a memory location (01–20) by
pressing a number or by repeatedly
8 or 9, then press
pressing
VOL/CID
.
CH/SELECT
If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record
appears.
If a record exists in the selected loca-
tion, Replace Memory?
prompting you to confirm the replace-
ment. Move the cursor to
then press
CH/SELECT

Deleting Caller ID Records

You can delete Caller ID records individually
or all at once.
Follow these steps to delete a single Caller
ID record.
1. Press then
CALL ID
recall the record you want to delete.
2. Press DELETE . Delete Message?
appears, prompting you to confirm the
deletion.
8 to move the cursor to
3. Press
VOL/CID
Yes , then press
CH/SELECT
Follow these steps to delete all Caller ID
records.
8 or 9 to
VOL/CID
Location
appears,
Yes or No ,
.
8 or 9 to
VOL/CID
or .
DELETE
Operation
The phone beeps once indicating that
the record was deleted.
1. Press so the record totals
CALL ID
appear.
2. Press .
DELETE
appears, prompting you to confirm the
deletion.
8 to move the cursor to
3. Press
VOL/CID
Yes , then press
CH/SELECT
The phone beeps once and
appears indicating that all Caller ID
records were deleted.
Delete All?
or .
DELETE
Total:00
21