Picture has shadows or "ghosts"
If your monitor is connected to an analog video port, press the
to automatically adjust your display image to the ideal settings.
Remove any extension cables or switchboxes.
Check the video port and the end of the video cable for any pins that
might be bent or pushed in.
Make sure the video cable is securely connected to the back of the
monitor and computer.
Make sure that the video cable is not damaged.
Color is not uniform
Make sure the monitor warms up for at least 30 minutes before making
a final judgment about color uniformity or brightness.
If your monitor is connected to an analog video port, press the
to automatically adjust your display image to the ideal settings.
Image is not sized or centered properly
If your monitor is connected to an analog video port, press the
to automatically adjust your display image to the ideal settings.
Use the position controls to adjust the image. For instructions on how
to change your display settings, see "Adjusting display settings" on
page 7.
Image cannot be adjusted full screen
Some video modes used by your monitor produce images that cannot be
adjusted all the way out to the bezel edge (the edge where the screen glass
and monitor casing meet).
This condition does not indicate that the monitor is defective.
www.gateway.com
Troubleshooting
button
button
button
17