Caller Id Messages; Adding/Deleting The Area Code; Dialing Numbers From Acaller Id Record; Storing A Caller Id Record In Memory - Radio Shack 43-3814 Owner's Manual

Caller ID Messages

Display
D[m0ýNN D[m0ýNN D[m0ýNN D[m0ýNN
Shows the number of new
JejWb0ýNN JejWb0ýNN JejWb0ýNN JejWb0ýNN
Caller ID records (records
you have not reviewed)
and the total number of
records.
Fh_lWj[ýDWc[ý Fh_lWj[ýDWc[ý
Fh_lWj[ýDWc[ý Fh_lWj[ýDWc[ý
or
The caller has blocked the
Fh_lWj[ýDkcX[h Fh_lWj[ýDkcX[h Fh_lWj[ýDkcX[h Fh_lWj[ýDkcX[h
Caller ID information.
KdademdýDWc[ KdademdýDWc[
KdademdýDWc[ KdademdýDWc[
The caller is not within a
Kdademdý Kdademdý Kdademdý Kdademdý
Caller ID service area.
or
DkcX[h DkcX[h DkcX[h DkcX[h
?dYecfb[j[ý:WjW ?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW ?dYecfb[j[ý:WjW
Appears if there was an
error during the
transmission of Caller ID
information. Occasional
errors are normal. If the
phone frequently displays
?dYecfb[j[ý:WjW ?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW ?dYecfb[j[ý:WjW
your local telephone
company or RadioShack
store.
ADDING/DELETING THE
AREA CODE
When the area code of the received call is
the same as the one you stored (see "Storing
Your Area Code" on Page 10), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press to add or delete the area
3
code. Pressing again deletes or adds the
3
area code.
When you dial the number or store it into
memory, the phone dials or stores the
number as it appears on the display.
16
Description
ý ý ý ý
, contact
Caller ID Operation
DIALING NUMBERS FROM A
CALLER ID RECORD
To dial a local number stored in a Caller ID
record, recall the record, then press
it is a long distance call, press
before the displayed number) before you
press . If you want to add or delete the
TALK
area code, press before you press
3
Note: If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example), you cannot dial from that
record.
STORING A CALLER ID
RECORD IN MEMORY
, then 8 or 9 to recall the
1. Press
CALL ID
record you want to store.
If it is a long distance number, press
If you want to add or delete the area
code, press .
3
I[b[YjýBeYWj_ed I[b[YjýBeYWj_ed I[b[YjýBeYWj_ed I[b[YjýBeYWj_ed
2. Press .
MEM
3. Choose a memory location (
pressing a number or by repeatedly
pressing 8 or 9, then press
If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record
appears.
If a record exists in the selected
H[fbWY[ýC[ceho5 H[fbWY[ýC[ceho5 H[fbWY[ýC[ceho5 H[fbWY[ýC[ceho5
location,
prompting you to confirm the
replacement. Move the cursor to
De De De De
, then press
SELECT
DELETING CALLER ID
RECORDS
You can delete Caller ID records individually
or all at once.
. If
TALK
' ' ' '
( appears
1
.
TALK
.
1
appears.
– ) by
0 9
.
SELECT
appears,
O[i O[i O[i O[i
or
.