Oreck UK2200 User Manual page 5

Operation: Assembling Your Oreck
1
Remove two screws from the
filtration bag port. Remove cardboard
insert by pulling upward.
8
®
2
Slide upper handle section over
matching section of the filtration
bag port. Insert short screw into top
hole and long screw into the bottom
hole then tighten firmly until handle
is secure.
Operation: Using Your Oreck
NOTE: Please read "Important Safety Instructions" before use.
1
Position Lock - Place foot on power
head and lean handle back gently to
release lock for vacuum use. Return
handle to the full upright position to
engage lock. The handle should be
rotated to center before returning
to upright position. Note: Do not
operate the unit while in the upright
and locked position. Do not let the
unit run while in any one stationary
position for any period of time. Keep
the unit moving while in operation.
CAUTION
NOT TO BE USED TO GROOM A PET.
®
2
Easy Power Cord Storage -
Wrap power cord around power cord
release hook and cord hook
on handle. Use power cord to secure
plug.
9