Using Mute; Using Flash; Using Tone Services On A Pulse Line; Memory Dialing - Radio Shack 43-3522 Owner's Manual

• The redial memory can also store
tone entries and pause entries.

Using Mute

Press to talk to someone else in
MUTE
the room without the person on the
other end of the phone line hearing
your conversation. You can still hear
the person on the other end of the
phone line. Press to resume
MUTE
your phone conversation.

Using Flash

Flash provides the electronic
equivalent of a switchhook signal for
special phone services such as Call
Waiting.
For example, if you have Call Waiting,
you can put your current call on hold
and answer a second call by pressing
. Press again to
FLASH FLASH
alternate between the two calls.
Note: If you do not have any special
phone services, pressing
disconnect your current call.
Using Tone Services on a
Pulse Line
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these tone services by following these
steps:
Dial the service's main number.
When the service answers, press
TONE/*
dial are sent as tone signals.
After you complete the call, press
TALK/HANG UP
keypad to the base. The phone
automatically resets to pulse dialing.

MEMORY DIALING

You can store up to 10 numbers, each
with up to 16 digits.
Notes:
• To keep your accounts secure, we
recommend you do not store your
personal access code for services
such as bank-by-phone in a
memory location.
• When storing numbers for special
services (such as alternate long
distance or bank-by-phone), store
the service's main phone number
in one memory location and
numbers for additional information
might
FLASH
in other locations.

Storing a Number in Memory

1. Press and release
TALK/LOW BATT indicator
flashes.
Note: If you do not press any button on
the remote keypad within about 10
seconds, a buzz sounds and the
phone exits the number storing
process. Start again from Step 1.
9
. Any additional numbers you
or return the remote
. The
MEM