Features And Benefits - D-Link DAP-3520 User Manual

DAP-350 User's Manual

Features and Benefits

Five different operation modes - Capable of operating in one of five different opera-

tion modes to meet your wireless networking needs: Access Point, WDS with AP,
WDS, Wireless Client, or WISP Client Router.
 Faster wireless networking with the 802.11n (draft) standard to provide a
maximum wireless signal rate of up to 300 Mbps*.
Compatible with the 802.11b standard to provide a wireless data rate of up to 11

Mbps, allowing you to migrate your system to the 802.11n (draft) and 802.11g
standards on your own schedule without sacrificing connectivity.
 Compatible with the 802.11g standard to provide a wireless data rate of up to 54
Mbps in the 2.4 GHz frequency range.
Compatible with the 802.11a standard to provide a wireless data rate of up to 54

Mbps in the 5 GHz frequency range.
Better security with WPA - The DAP-3520 can securely connect wireless clients

on the network using WPA (Wi-Fi Protected Access) to provide a much higher
level of security for your data and communications than its previous versions.
AP Manager II management software - The real-time display of the network's

topology and AP's information makes network configuration and management
quick and simple.
SNMP for management - The DAP-3520 is not just fast, but also supports

SNMP v.3 for better network management. Superior wireless AP manager
software is bundled with the DAP-3520 for network configuration and firmware
upgrade. Systems administrators can also set up the DAP-3520 easily with the
Web-based configuration. A D-Link D-View 6.0 module will be downloadable
for network administration and real-time network traffic monitoring with D-Link
D-View 6.0 software.
Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing).

 Supports 802.3af Power over Ethernet.
Supports one 10/100/1000M Ethernet port.

Operates in the 2.4~2.5 GHz and 5.15~5.85 GHz** frequency ranges.

Supports PPPoE on WAN interface (WISP Client Router mode).

Supports NAT mode and simple firewall (WISP Client Router mode).

Built-in heater.

Web-based interface for managing and configuring.

*Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput may vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead can lower actual data throughout rate.
**Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The
DAP-3520 isn't supported in the 5.25~5.35 GHz and 5.47 ~ 5.725 GHz frequency ranges in some regions.
D-Link AirPremier N Dual Band Exterior PoE Access Point
Features and Benefits
6