D-Link DAP-3520 User Manual page 43

DAP-350 User's Manual
SSID Visibility: Enable or Disable SSID visibility. Enabling this feature broadcasts
WMM (Wi-Fi Multimedia):
Encryption:
Key Type:
Key Index (1~4):
Network Key:
Confirm Key:
WPA Mode:
Cipher Type:
Group Key Update
PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the
D-Link AirPremier N Dual Band Exterior PoE Access Point
SSID: Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID's factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
the SSID across the network, thus making it visible to all network
users.
The Multi-SSID security can be Open System, WPA-Personal, or
Security:
WPA-Enterprise. For a detailed description of the Open System
parameters please go to page 26. For a detailed description of the
WPA-Personal parameters please go to page 27. For a detailed
description of the WPA-Enterprise parameters please go to pages
28-29.
Priority: Select the desired priority from the drop-down menu.
Select Enable or Disable.
When you select Open System, toggle between Enable and
Disable. If Enable is selected, the Key Type, Key Size, Key Index
(1~4), Network Key, and Confirm Keys must also be configured.
Select HEX or ASCII.
Key Size:
Select 64 Bits or 128 Bits.
Select from the 1st to the 4th key to be set as the active key.
Enter a network key, otherwise known as a password.
Retype the network key.
When you select either WPA-Personal or WPA-Enterprise, you
must also choose a WPA mode from the pull-down menu: AUTO
(WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use
different algorithms. AUTO (WPA or WPA2) allows you to use both
WPA and WPA2. In addition, you must configure Cipher Type, and
Group Key Update Interval.
Select Auto, AES, or TKIP from the pull-down menu.
Select the interval during which the group key will be valid. The
Interval:
default value of 1800 seconds is recommended.
corresponding field.
Using the Configuration Menu
43