Switch Installation
Note
Step 3
Replace the dust covers when you remove the FlexStack cables from the connectors.
Caution
Removing a FlexStack Cable
Procedure
Step 1
To remove a FlexStack cable, grasp the tab on the cable connector and gently pull straight out.
Step 2
When you remove the FlexStack cables from the connectors, replace the dust covers to protect them from
dust.
Caution
OL-30278-02
When you connect the FlexStack cable to the STACK 1 port, the tab should be above the connector.
When you connect the FlexStack cable to the STACK 2 port, the tab should be below the connector.
Removing and installing the FlexStack cable can shorten its useful life. Do not remove and insert
the cable more often than is absolutely necessary.
Removing and installing the FlexStack cable can shorten its useful life. Do not remove and insert
the cable more often than is absolutely necessary.
Removing a FlexStack Cable
Catalyst 6800IA Switch Hardware Installation Guide
35