Using The Alarm; Setting The Alarm Time - Radio Shack 63-969 Owner's Manual

63-969.fm Page 10 Monday, September 27, 1999 9:19 AM
Caution: The projection arm moves about 90 degrees in
either direction. Do not force it.
To focus the time on the desired position, adjust
on the side of the projection arm.
To turn off the projection light, slide
toward the projection arm.
ON
With the projection light off, you can also project the time
by pressing
SNOOZE/LIGHT
5 seconds then automatically turns off.

USING THE ALARM

Setting the Alarm Time

Note: If you do not press a button within about 90 sec-
onds after you pressed the previous button, the clock ex-
its its alarm setup mode. Start over at Step 1.
1. Hold down
ALARM STOP/ALARM SET
time and
2. Hold down or repeatedly press
alarm hour advances by 1 with each press.
10
. The projector lights for about
appear. The hour digit flashes.
FOCUS
PROJECTION LIGHT
until the alarm
. appears and the
+