63-968.fm Page 12 Friday, July 2, 1999 2:19 PM
OPERATION
To switch between viewing the seconds display and the day of
the week, press
. To switch between viewing the
MODE/SET
month/date and the alarm time, press
ALARM STOP/ALARM
.
SET
Note: After the clock successfully receives a good signal,
appears for about 96 hours. It might change during the radio
signal reception times but will return to
at the end of the re-
ception time.
To test the reception at a specific location and update the set
time at any time (instead of waiting for the preprogrammed
times), turn off automatic time setting, then turn it back on (see
"Turning Automatic Time Setting Off/On" on Page 16).
CHANGING THE TIME ZONE
The clock automatically shows a time zone (
P
for Pacific,
M
for
Mountain,
for Central, or
for Eastern). You can set it if nec-
C
E
essary to show your time zone. To change the time zone, re-
peatedly press
until your time zone is
ZONE/AUTO OFF
highlighted.
USING THE ALARM
Setting the Alarm Time
1. Hold down
until the alarm hour
ALARM STOP/ALARM SET
digits flash.
12