Radio Shack CT-503 Owner's Manual page 50

17-1112.fm Page 50 Wednesday, July 21, 1999 2:34 PM
Notes:
• Enable PIN dialing on your phone only if it is required by
your cellular provider.
• You must store your PIN in memory 07, otherwise your
phone cannot properly make calls through your cellular
system.
• If you enter a service area which does not require PIN
dialing, disable PIN dialing on your phone.
Enabling/Disabling PIN Dialing
1. Press .
1
FCN
2. Repeatedly press
Pin inActiv or ActivE
3. Press so ActivE
STO
inActiv appears (to disable).
4. To exit the function menu, press
Making a Call Using Your PIN
1. With PIN dialing enabled, dial or speed dial the number
you want to call, as usual, then press
2. When you hear the tones (2 beeps), press
The phone automatically sends your PIN code to finish
dialing the call.
Note: If you did not store your PIN in memory 07, or you
stored an incorrect PIN,
your PIN is correct, then try again.
50
or # until the phone displays
.
appears (to enable) or
.
END
.
SND
SND
invALid Pin appears. Be sure
so
CLR
again.