Radio Shack CT-503 Owner's Manual page 37

17-1112.fm Page 37 Wednesday, July 21, 1999 2:34 PM
The phone remains locked until you unlock it. To unlock your
phone, simply enter the three-digit lock code. If you make a
mistake, press then try again.
CLR
Using Automatic Lock
The automatic lock feature lets you set your phone to auto-
matically lock each time you turn it on. When automatic lock
is enabled, Loc 'd appears after the self test when you turn
on the phone. You can unlock the phone as usual at anytime.
Follow these steps to enable or disable automatic lock.
1. Press .
1
FCN
2. Repeatedly press
Auto Lock On or
3. Press so On
STO
appears (to disable).
4. To exit the function menu, press
Changing the Lock Code
For added security, you can change the lock code, but you
must enter a preset 6-digit security code first. Your phone's
preset security code is 000000 (you cannot change this
code).
Follow these steps to change your phone's lock code.
Note: The phone's display does not change (no characters
appear when you press the keys) until you press
4.
1. Press .
0
FCN
OPER
or # until the phone displays
OFF .
appears (to enable) or
.
END
so OFF
CLR
in Step
STO
37