Assembly - Siemens 1LA8 Operating & Installation Instructions Manual

Assembly

Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions
● Comply with the applicable national and sector-specific regulations at the place of
● When using the machine within the European Union, comply with the specifications laid
See also
Safety information (Page 15)
Note
Loss of conformity with European directives
In the delivery state, the machine corresponds to the requirements of the European directives.
Unauthorized changes or modifications to the machine lead to the loss of conformity with
European directives and the loss of warranty.
Explosion hazard when making modifications to the machine
Substantial modifications to the machine are not permitted – or may only be performed by
the manufacturer. Otherwise an explosion can occur in an explosive atmosphere. This can
result in death, serious injury or material damage.
Please contact the Service Center, if necessary.
See also
Service and Support (Page 149)
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 08/2017
installation
down in EN 50110‑1 regarding safe operation of electrical equipment.
WARNING
5
49