Oppo BDP-103 Manual page 13

_720P60 – 720p 60/59.94Hz
_720P50 – 720p 50Hz
1080I60 – 1080i 60/59.94Hz
1080I50 – 1080i 50Hz
1080P60 – 1080p 60/59.94Hz
1080P50 – 1080p 50Hz
1080P24 – 1080p 24Hz
1080P23 – 1080p 23.97Hz
Examples:
The following are examples of playing a Blu-ray movie using the network remote control
protocol. The comments are placed after the semicolon.
Example 1 – No verbose mode in use. Backwards compatible to the original version of
the network remote control protocol.
REMOTE PON
@OK ON
REMOTE QPW
@OK OFF
while)
REMOTE QPW
@OK ON
REMOTE EJT
@OK OPEN
REMOTE PLA
@OK PLAY
REMOTE QDT
@OK LOADING
REMOTE QDT
@OK BD-MV
REMOTE QPL
@OK PLAY
REMOTE STP
@OK STOP
REMOTE EJT
@OK OPEN
REMOTE POF
@OK OFF
Example 2 – Verbose mode 2. The player provides important status updates.
REMOTE SVM 2
@SVM OK 2
REMOTE PON
@PON OK ON
@UPW 1
; Turn on power
; Player is turned on
; Check power status
; Player is still doing power-on initialization(Wait for a
; Check power status
; Player is powered on and ready
; Eject the tray
; Tray opens(Place a disc on the tray)
; Start playback
; You may get "ER OVERTIME" message due to the
mechanical delay. This is normal
; Check disc type
; Player is still loading(Wait for a while)
; Check disc type again
: Disc is a Blu-ray disc.
; Check playback status
: Playback is in progress(Watch the movie)
; Stop playback
: Playback has stopped
; Eject the tray
; Tray opens(Take out the disc)
; Turn off power
; The player turns off
; Set verbose mode to level 2
; Response to confirm the verbose mode. Notice the
SVM command code is now included in the response.
; Turn on power
; Player is turned on
; Player provides a status update to indicate the new power
status
13
OPPO Digital, Inc. • www.oppodigital.com