Oppo BDP-103 Manual page 10

CIN
SDB X Y NNN
Status Update Messages:
The following status update messages are sent by the player automatically when the
verbose mode is set to 2 or 3.
Verbose Mode 2:
UPW - Power Status Update:
Sent when there is a change of power on/off status.
Possible parameters: 1 digit
1 – Player is turned on
0 – Player is going off
Example: @UPW 1
UPL - Playback Status Update:
Sent when there is a change of playback status.
Possible Parameters: 4 chars
DISC – No disc
LOAD – Loading disc
OPEN – Tray is open
CLOS – Tray is closing
PLAY – Playback is starting
PAUS – Playback is paused
STOP – Playback is stopped
STPF – Forward frame-by-frame step mode
STPR – Reverse frame-by-frame step mode
FFWn – Fast forward mode. Where n is a number of 1... 5 to indicate the
speed level
FRVn – Fast reverse mode. Where n is a number of 1... 5 to indicate the
speed level
SFWn – Slow forward mode. Where n is a number of 1...4 to indicate the
speed level (1 = ½, 2 = ¼, 3 = 1/8, 4 = 1/16)
SRVn – Slow reverse mode. Where n is a number of 1...4 to indicate the
speed level (1 = ½, 2 = ¼, 3 = 1/8, 4 = 1/16)
HOME – in home menu
PIC – Picasa
RHA – Rhapsody
CIN - CinemaNow
Set the parameters for Darbee video
processor (Apply to BDP-103D Blu-
ray Player on HDMI 1 OUT only)
(X: Demo mode
0 – Off
1 – Split Screen
2 – Swipe Screen
Y: Darbee mode
0 – Off
1 – High Definition
2 – Gaming
3 – Full Pop
10
OPPO Digital, Inc. • www.oppodigital.com
OK CIN
ER INVALID
OK X Y NNN
ER INVALID