Grizzly G0452 Owner's Manual page 41

T10125—6" Spiral Cutterhead
We've found yet another source for high quality
Spiral Cutterheads. These Cutterheads feature 4
spirals and German-made carbide inserts for an
incredible finish.
Figure 58. Spiral Cutterhead.
H7653—6" Spiral Cutterhead
This cutterhead replaces the standard straight
knife cutterheads on our Grizzly jointers. It has
four spirals with indexable, four-sided carbide
inserts, so each insert can be rotated for a new
factory sharp edge. Cutterhead includes cast iron
pulleys, bearing blocks, mounting studs, 5 extra
inserts, T-handle wrench, Torx bits and spare
insert screws. Has an incredible finish, and is
comparable to Byrd cutterheads in quality of cut
as well as the quality of the cutterhead itself.
Figure 59. Spiral Cutterhead.
Model G0452/P/Z (Mfg. Since 08/12)
H7764—Byrd Tool 6" Shelix Cutterhead
Made in the USA by Byrd, these indexable car-
bide insert cutterheads are very well made and
leave a great finish. The inserts are positioned
along a spiral pattern, and rotate at a slight angle
for a shearing action that leaves a glassy smooth
cut on the toughest of woods. Comes with all 30
inserts on the cutterhead, plus 5 extras.
Figure 60. Shelix Cutterhead.
T21348—Carbide Replacement Inserts
Solid Carbide Indexable Inserts for Cutterheads.
Size: 14 x 14 x 2mm (10 pack).
Figure 61. Replacement inserts.
-39-