Led Status - Cisco Linksys E4200 Supplemental Information

3.2 Buttons, Ports and Label
3.2.1 Buttons
x
Reset button to be recessed and located on the back of the unit
x
Wi-Fi Protected Setup button to be recessed and located on the back of the unit
3.2.2 Ports
x
One power port
x
One Gigabit Internet port
x
Four Gigabit switch Ethernet LAN ports
x
One USB port
x
Power switch
3.2.3 Label
x
Label are clearly marked
x
No Obstruction for the back ports and button

3.3 LED Status

LED
Power
White/Amber
LAN
(1-4 ports)
Yellow/Green
Internet
Yellow/Green
Color(s) Activity
Off
White blinking
Blue on
/Blue
Blue blinking
Amber blinking WPS PBC session overlap is detected
Amber on
Off
Green on
Yellow blinking Data transfer in 10/100/Gigabit network
Off
Green on
Yellow blinking Data transfer in 10/100/Gigabit network
Description
Power Off
Booting / System Self-Test / Firmware upgrade
Power On / Device Ready, WPS is successful
WPS is in progress
WPS is error, after 120 seconds then back to original
No connection on LAN port
Connecting to a 10/100/Gigabit link
No connection on LAN port
Connecting to a 10/100/Gigabit link