Using The Setup Menu; Activating The Setup Menu - Motorola IHF1700Music Motomanual

Using the Setup Menu

The setup menu is used for Bluetooth device management features such as pairing,
connecting, disconnecting and removing devices.
The setup menu is also used to change various handsfree system settings such as Caller ID
Announcement and Expert Mode.

Activating the Setup Menu

If a handset device is connected.
1 Press and release the Multi-Function button.
The handsfree system responds: Phone menu. {Say a command}.
2 When prompted, say "Setup menu".
The handsfree system responds: Setup menu. {Say a command}.
If a handset device is not connected.
1 Press and release the Multi-Function button.
The handsfree system responds: Setup menu. {Say a command}.
Pair a Handset Device
Tip: Before pairing, think of a suitable name for your handset device. For example, you can
say 'Jenny's Phone', 'Karl's Razr' etc.
Important: The process of initiating a Bluetooth connection with a handset device varies by
manufacturer. Please have your handset device's user manual available for reference if
needed.
1 Your handset device's Bluetooth feature is off by default. To use your car handsfree system,
you must first turn on the Bluetooth feature in your device. See your device's user manual.
2 Activate the Setup menu.
3 When prompted, say "Pair Device".
The handsfree system responds: Set your device in scan mode and enter 0000 if prompted
for the passcode.
The Blue LED will flash slowly during the pairing process.
4 Perform a device discovery from the handset device (See your device's user manual).
Your handset device will search for any Bluetooth devices around it. When the search is
complete, it will display a list of the devices it finds. Searching may take a minute or two to
complete.
5 Select Motorola IHF1700M from the list of devices.
6 If prompted by the handset device, enter the passkey 0000, and press the
7 The handsfree system responds: Pairing complete. Please say a friendly name for the
device.
Say a friendly device name for your handset device. For example, you can say 'Jenny's
Phone'
8 The handsfree system responds: <device name> added.
Some handset devices may ask you to accept the Bluetooth link. Enter
9 After a few seconds the handsfree system responds: Connection complete.
Or use the UIM: A press and hold of the Multi-Function button will activate the pairing
procedure.
Connect a Paired Handset Device
1 Activate the Setup menu.
2 When prompted, say "Connect <device name>", where <device name> is the friendly
name for the handset device you want to connect. For example 'Connect Jenny's Phone'
The handsfree system responds: Connecting <device name>.
Upon successful completion, the handsfree system responds: Connection complete.
key.
OK
.
Yes