Adding Contact List Entries Via Bluetooth - Motorola IHF1700Music Motomanual

Adding Contact List Entries via Bluetooth

You can quickly transfer numbers from your handset device's phonebook via Bluetooth to the
handsfree system
Adding a Contact List Entry from your Handset Device
1 Press and release the Multi-Function button.
The handsfree system responds: Phone menu. {Say a command}.
2 When prompted, say "Contact List".
3 The handsfree system responds: Contact list. {Say a command}. Say "Add Phone
Contact".
4 The handsfree system disconnects your handset device and responds: Add phone contact
and is ready to receive contacts via Bluetooth from your handset device.
The Blue LED will flash fast to indicate that the handsfree system is waiting for contacts to
be sent from your handset device.
5 Select the desired contact(s) on your handset device and send them via Bluetooth to
Motorola IHF1700M Refer to your handset device's user's guide for more details on how to
.
transfer contacts via Bluetooth.
6 If prompted by the handset device, enter the passkey 0000, and press the
7 When the contact is received by the handsfree system, the system responds by reading out
the contact number as follows: <contact number #1> Yes or No?
Say "Yes" to accept the number.
or
Say "No" to reject the number and go to the next number/contact if one exists.
8 If the number is accepted, the handsfree system responds: Say the name. Recite the name
of the contact to be stored e.g. Mark's Mobile.
If an error is detected, the handsfree system asks you to try again.
If it accepts the name, the handsfree system responds: Contact <name> added.
9 If the sent contact has another number, the handsfree system responds: <contact number
#2> Yes or No?. Simply repeat steps 7 and 8.
If more than one contact is transferred, the handsfree system responds: Next contact.
<contact number #3> Yes or No?. Simply repeat steps 7 and 8.
This continues until all the sent contact numbers have been processed.
10 When all the sent contact numbers are processed, the handsfree system will respond:
Would you like to add another contact?
Say "Yes" to add another contact via Bluetooth. The handsfree system responds: Add
phone contact and is ready to receive the next contact.
or
Say "No" to exit 'Add Phone Contact' mode. The handsfree system responds: Goodbye and
automatically reconnects your handset device.
11 At any time, you can exit 'Add Phone Contact' mode by a press and release of the End
button. The handsfree system responds: Goodbye and automatically reconnects your handset
device.
Tip: To speed up adding multiple contacts, step 10 is bypassed in Expert Mode. After adding
a contact, the handsfree system will simply respond: Add phone contact and is ready to
receive the next contact while the Blue LED remains flashing fast. Press and release the End
button to exit at any time.
key.
OK