Phone Operation; Using Redial; Using Flash; Using Tone Services On A Pulse Line - Radio Shack CID-927 Owner's Manual

43-927.fm Page 9 Thursday, June 24, 1999 9:36 AM

PHONE OPERATION

USING REDIAL

The redial memory holds up to 32 digits,
so it can store both long-distance and lo-
cal numbers. To redial the last number,
lift the handset then press
Notes:
• The redial memory only stores the
last 32 digits of any number dialed.
• The redial memory does not store a
flash entry but stores any digits you
press after
FLASH
Flash").

USING FLASH

performs the electronic equiva-
FLASH
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press to answer an incoming call
FLASH
without disconnecting the current call.
Press again to return to the first
FLASH
call.
Note: If you do not have any special
phone services, pressing
disconnect the current call.
USING TONE SERVICES
.
REDIAL
ON A PULSE LINE
REDIAL
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, follow these steps to
use those special services.
1. Be sure
PULSE
2. Call the service.
3. When the service answers, press
are sent as tone signals.
(see "Using
STORING AND DIALING
PRIORITY NUMBERS
You can store emergency phone num-
bers or the phone numbers you call
most frequently in the three priority
memory locations for one-touch dialing.
Each memory location can store up to
16 digits.
FLASH
FLASH
TONE/PULSE
.
. Any additional numbers you dial
might
is set to
9