LG 50PX5R Owner's Manual page 40

External Control Device Setup
26. Low Power
(Command 1 : j, Command 2 : q)
G To reduce the power consumption of the TV. You can
also adjust Low Power in SPECIAL menu.
Transmission
[j][q][ ][Set ID][ ][Data][ ][Cr]
Data 0 : Off
1 : On
Ack
[q][ ][Set ID][ ][OK][Data][x]
27. Orbiter Time Setting
(Command 1 : j, Command 2 : r)
G To adjust orbiter operation time term.
Transmission
[j][r][ ][Set ID][ ][Data][ ][Cr]
Data Min: 1 ~ Max: FE
* Refer to 'Real data mapping 1'.
Ack
[r][ ][Set ID][ ][OK][Data][x]
28. Orbiter Pixel Setting
(Command 1 : j, Command 2 : s)
G To adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 3
* Refer to 'Real data mapping 1'.
Ack
[s][ ][Set ID][ ][OK][Data][x]
29. Picture Size Setting for DW Mode
(Command 1 : j, Command 2 : t)
G To select the DW picture format.
You can also select the DW picture format using the
SIZE on the remote control.
Transmission
[j][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 20
* Refer to 'Real data mapping 1'.
Ack
[t][ ][Set ID][ ][OK][Data][x]
40 Plasma TV
30. Auto Configure
(Command 1 : j, Command 2 : u)
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Ack
[u][ ][Set ID][ ][OK][Data][x]
31. Tune Command
(Command 1 : m, Command 2 : a)
G Tune Channel to following Physical number.
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ]
[Data3][ ][Data4][ ][Data5][Cr]
Data0 Min: 0 ~ Max: 7D
Data1~4 Don't care
Data5 High -> Main channel: 0 Sub channel: 8
Low -> Air : 0, CATV : 1
Ack
[a][ ][Set ID][ ][OK][Data0][ ][Data1][ ][Data2][ ]
[Data3][ ][Data4][ ][Data5][x]
32. Channel Add/Del
(Command 1 : m, Command 2 : b)
G To add and delete the channels.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0 : Channel Memory
1 : Channel Erase
Ack
[b][ ][OK][Set ID][ ][Data][x]
* Real data mapping 1
0 : Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
* Real data mapping 2
0 : -30
1 : -29
2 : -28
1E : 0
3A : +28
3B : +29
3C : +30