Screen Menu Options; Auto Adjustment; Setting Picture Format; Manual Configure - LG 50PX5R Owner's Manual

Operation

Screen Menu Options

Screen Menu Options
Auto Auto Adjustment Adjustment
- RGB (PC) mode only; This function doesn't work for RGB (DTV) mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
- The Auto config. and Manual config.
1. Press the MENU button and then use
G
2. Press the button and then use
3. Press the G button to run Auto configure.
• When Auto config. has finished,
• If the position of the image is still not correct, try Auto adjustment again.
4. In RGB (PC) mode, if the image needs to be adjusted more after using
config. , you can make further adjustments with the

Setting Picture Format

Setting Picture Format
- Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
- Set every aspect ratio for TV, Video, Component 480i sources.
- Use 4:3, or 16:9 for other RGB sources.
- Horizon is not available for Component (480p,720p,1080i), DTV (480p,720p,1080i) sources.
1. Press the ARC button repeatedly to select the desired picture format. You can also adjust
• 4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides.
•
16:9
Choose when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
16:9
• Horizon
Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create
a spectacular view.
• Zoom
- Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
Manual Configure (RGB mode only)
Manual Configure (RGB mode only)
- If the image still isn't clear after auto adjustment and especially if characters are still
jittery, adjust the picture Phase manually.
- To correct the screen size, adjust
- This function works in the following mode : RGB, COMPONENT
(480p/576p/720p/1080i), HDMI (480p/576p/720p/1080i).
- It's not available to use Phase, Clock function in RGB, COMPONENT
(480p/576p/720p/1080i), HDMI (480p/576p/720p/1080i) mode.
1. Press the MENU button and then use
G
2. Press the button and then use
3. Press the G button and then use
Position or V-Position .
F / G
4. Use the button to make appropriate adjustments.
• The Phase adjustment range is 0 ~ 30.
• The Clock adjustment range is -127 ~ +128.
5. Press the ENTER button to save.
Selecting VGA Selecting VGA Mode (RGB mode only) Mode (RGB mode only)
- To see a normal picture, match the resolution of RGB mode and selection of VGA mode.
1. Press the MENU button and then use
G
2. Press the button and then use
G
3. Press the button and then use
4. Press the ENTER button to save.
32 Plasma TV
are not active in HDMI mode.
D / E button to select the
D / E button to select Auto config.
OK will be shown on screen.
Manual config.
Clock .
D / E button to select the
D / E button to select Manual config.
button to to select
D / E Phase
button to select the
D / E
D / E button to select VGA Mode
D / E button to select the desired VGA resolution.
SCREEN menu.
.
Auto
option.
ARC
SCREEN menu.
.
, ,
Clock H-
SCREEN menu.
.
SCREEN
SCREEN
Auto config. G
To set
Manual config.
VGA Mode
ARC
Zoom in/out
Position
Cinema
NR
Reset
MENU Prev.
in the menu.
SCREEN
SCREEN
SCREEN
Auto config.
G
Manual config.
Phase 0
VGA Mode
Clock 0
ARC
H-position 0
Zoom in/out
Position V-position 0
Cinema
NR
Reset
MENU Prev.
SCREEN
SCREEN
Auto config.
Manual config.
VGA Mode G
640x480
ARC
848x480
Zoom in/out
852x480
Position
Cinema
NR
Reset
MENU Prev.