Pc Setup - LG 50PX5R Owner's Manual

PC Setup

PC Setup
How to connect
1. To get the best picture quality, adjust the PC
graphics card to 640x 480, 60Hz.
2. Use the TV's RGB INPUT or HDMI(DVI VIDEO)
INPUT port for video connections, depending on
your PC connector.
• If the graphic card on the PC does not output
analog and digital RGB simultaneously, connect
only one of either RGB INPUT or HDMI(DVI
VIDEO) to display the PC on the TV.
• If the graphic card on the PC does output analog
and digital RGB simultaneously, set the TV to
either RGB or HDMI(DVI VIDEO); (the other
mode is set to Plug and Play automatically by the
TV.)
3. Then, make the corresponding audio connection. If
using a sound card, adjust the PC sound as
required.
How to use
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Use TV/VIDEO on the remote control to select RGB, or HDMI source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC
mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card.
NOTES: • Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently
imprinted on the screen. Use the Orbiter screen saver when possible.
• The synchronization input form for Horizontal and Vertical frequencies is separate.
AUDIO AUDIO
REMOTE
CONTROL RGB OUTPUT R L
RS-232C INPUT
HDMI/ VARIABLE ARIABLE
(CONTROL/SERVICE) DVI(VIDEO) AUDIO INPUT RGB INPUT AUDIO OUT AUDIO OUT
Installation
COMPONENT INPUT 2
COMPONENT INPUT 1
R L
VIDEO AUDIO
Antenna
Owner's Manual 19