Table of Contents
Advertisement
43-976.fm Page 11 Monday, August 16, 1999 4:38 PM
PREPARATION
SETTING THE RINGER
SWITCH
The ringer switch controls the volume
of the phone's ring. Set the switch to
in a noisy room (such as a kitch-
HIGH
en) or to
in a quiet room (such as
LOW
a bedroom).
If you do not want the ringer to sound,
set
to
. You can still make
RINGER
OFF
calls, and you can answer calls if you
hear another phone on the same
phone line ring.
SETTING THE DIALING
MODE
Set
for the type of
TONE/PULSE
service you have, either tone or pulse
(rotary). If you are not sure which type
you have, do this simple test.
1. Set
to
TONE/PULSE
2. Lift the handset and listen for a
dial tone.
3. Press any number except 0. If the
dial tone stops, you have touch-
tone service. If the dial tone
continues,
you
service.
4. If you have pulse service, set
to
TONE/PULSE
PULSE
.
TONE
have
pulse
.
11
Advertisement
Table of Contents
