™
Rosemount
2240S Installation
October 2017
4.3.3
Wall mounting
To mount the Rosemount 2240S on a wall, do the following:
32
94 mm (3.7 in.)
70 mm (2.7 in.)
Ø 9mm (0.35 in.)
Screw
00809-0100-2240, Rev DA
1. Drill four 9 mm (0.35 in.) holes in the wall
to fit the hole pattern of the bracket.
2. Attach the bracket to the wall by using the
four M8 screws.
3. Attach the Rosemount 2240S transmitter
to the bracket.
4. Secure the transmitter with the screw on
top of the bracket.
5. Proceed with electrical installation of
Tankbus, temperature elements, and
water level sensor. See
installation" on page
Rosemount
Reference Manual
"Electrical
33.
™
2240S Installation