Table of Contents
Advertisement
AXIS 231D+/232D+ - Live View Config
24
Viewer Settings
Checking the Show viewer toolbar box displays the AMC toolbar under the video stream.
By checking the Enable MPEG-4 decoder installation box, it is also possible for the
Administrator to enable or disable the installation of the MPEG-4 decoder. This is used to
prevent the installation of unlicensed copies. Further decoder licenses can be purchased
from your Axis dealer.
Check the Show crosshair in PTZ joystick mode checkbox to indicate the center of the
image when viewing the video stream in PTZ joystick mode.
Check Use PTZ joystick mode as default
Check Enable recording button to start an MPEG-4 recording directly from the Live View
page.
HTML Examples
You can add live video from your AXIS 231D+/232D+ to your own web site. The video
server can send Motion-JPEG or MPEG-4 images to up to 20 simultaneous connections,
although an administrator can restrict this to fewer. This does not affect or include the
number of multicast viewers.
Enter the Image Type, Image size and other settings to suit your web page and click
Update.
External Video
An external video source is a source originating from some other Axis device on the
network. The images from these sources can be displayed just as if they were produced by
the AXIS 231D+/232D+.
The External Video Source list shows all of the external video sources currently
configured. The information displayed is the source's name and the path to the video
stream. Up to 20 external video sources can be configured.
Working with External Video Sources
1. To add a new video source, click the Add button. This opens the External Video
Source Setup dialog, which is used to make all the necessary settings.
2. To modify an existing video source, select it and click the Modify button.
3. To delete an external video source, select it and click the Remove button.
to set PTZ mode to joystick.
Advertisement
Table of Contents
