Disassembly Of Main P.c.b - Panasonic SA-PT464P Service Manual

Step 2 Remove 2 screws from the AC Inlet shield plate unit.
Step 3 Remove the AC Inlet shield plate unit.
Caution: Keep the AC Inlet shield plate unit in safe place.
Avoid denting it. Place it back during assembling.
Step 4 Remove the D-Amp P.C.B. bracket.
Caution: Keep the P.C.B. bracket in safe place. Avoid dent-
ing it. Place it back during assembling.
Step 5 Use plier to release the P.C.B. Spacer.
Step 6 Desolder black (TL20)and red (TL10) wire on AC Inlet
P.C.B.
Step 7 Remove AC Inlet P.C.B.
Caution: During assembling of AC Inlet P.C.B., ensure the
P.C.B. is seated properly at the locators.

9.11. Disassembly of Main P.C.B.

• Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Remove 3 screws at the rear panel.
Step 2 Remove 2 screws on Main P.C.B.
Step 3 Remove 2 ground springs on Main P.C.B.
55