Download Print this page
Westinghouse PT30125 Instruction Manual
Westinghouse PT30125 Instruction Manual

Westinghouse PT30125 Instruction Manual

3/4" rotary hammer drill

Advertisement

Quick Links

INSTRUCTION MANUAL
3/4" ROTARY HAMMER DRILL
3/4
120
V
INCH
60
Hz
NOTE: Before operating this tool, read this manual
and follow all safety rules and operating instructions.
PT30125
650
W
0~2,050
4.2
rpm
A
C
US

Advertisement

loading

Summary of Contents for Westinghouse PT30125

  • Page 1 INSTRUCTION MANUAL 3/4" ROTARY HAMMER DRILL PT30125 0~2,050 INCH NOTE: Before operating this tool, read this manual and follow all safety rules and operating instructions.
  • Page 2 The numbering of the product features refers to the illustration of the machine on the graphics. 1. Chuck 2. SDS-plus tool holder 3. Dust protection cap 4. Locking sleeve 5. Rotational direction switch 6. Lock-on button for On/Off switch 7. On/Off switch 8.
  • Page 3 FIG. 8 FIG. 12 FIG. 14...
  • Page 4 MACHINE SPECIFIC SAFETY WARNING 1) Machine Specific Safety Warnings working. Damaged cables increase the risk of an electric shock. Wear hearing protection. Exposure to noise can 2) Functional Description cause hearing loss. Always use the auxiliary handle supplied with the Read all safety warnings and all instructions.
  • Page 5 OPERATION INSTRUCTION Rotating the Auxiliary Handle, the auxiliary handle Setting the Operating mode, with the selector 11 can be set to any position for a secure and switch for drilling/ hammer drilling 9, the operating mode of the machine is selected. To change the low-fatigue working posture.
  • Page 6 OPERATION INSTRUCTION Safety Clutch If the machine should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service If the tool insert becomes caught or jammed, the drive to the drill spindle is interrupted. Because of centre for power tools.
  • Page 7 OPERATION INSTRUCTION The values given are valid for nominal voltages (U) 110/120v – 60Hz. For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
  • Page 8: Part List

    PART LIST N° PART NAME N° PART NAME N° PART NAME Screw Front cover Felted wool Cable press plate Clip ring Small gear Hammer clutch Cable sleeve Steel ball block Steel ball block plate Middle axis Cable Steel ball support plate Steel ball Screw Steel ball block spring...
  • Page 9: Exploded View

    EXPLODED VIEW...