Ice Machine In Cabinet - Follett Maestro Plus MCD425WBS Installation Instructions Manual

4.1

Ice machine in cabinet

Maestro ice machines can be installed undercounter/in-cabinet to fill bins or dispensers using RIDE technology.
Care must be taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can
cause ice machine outages.
18.00" (45.7 cm)
exhaust
§ The supplied exhaust grille must be located at least
18" (46 cm) from the supplied air intake grille (exhaust
air must not recirculate with intake air).
§ Cabinet interior must be open to allow for unrestricted
exhaust air flow.
§ Ice transport tube needs minimum 1/4" per foot (2 cm
per meter) pitch toward ice machine and should be
secured to prevent dips and traps from forming.
Vision • RIDE Technology
Supplied
grilles
Maestro
ice machine
minimum
22.75" (57.8 cm)
minimum
24.50"
(62.2 cm)
minimum
air in
Cabinet door
must mate directly
to air intake gasket
electric
water
drain
§ Cabinet door must mate directly to air intake
gasket.
§ Cabinet interior must provide a minimum clear
space of 22.75" deep (57.8 cm) by 29" high
(74 cm).
Note: 25.75" (65.4 cm) required for plug
removal if receptacle located directly
behind unit.
§ Cutout for supplied grilles must meet minimum size
requirements shown above.
§ Utilities should be conveniently located as shown.
Maestro Plus
Ice transport tube
minimum 1/4" per foot
(2 cm per meter)
pitch toward ice machine
secure to prevent dips
and traps from forming
9