22 / 50
Siemens
Building Technologies
3.2.2
Maintenance
The actuators are maintenance-free.
Mounting:
· Do not touch the valve coupling if the components (valve/pipes) are hot
· If necessary, disconnect electrical connections from the terminals
The actuator must be correctly fitted to the valve before recommissioning.
3.2.3
Disposal
The products contain electrical and electronic components and must not be
disposed of together with domestic waste. This applies in particular to the printed
circuit board.
Legislation may demand special handling of certain components, respectively it
may be sensible from an ecological point of view.
Observe all local and currently valid legislation.
Actuators SAS.., SAT.. for valves
Handling
CE1P4041en
2015-05-19