Table of Contents
Advertisement
When installing, reverse the steps listed.
STEP
4
■
License plate lights
STEP
1
STEP
2
When installing, reverse the steps listed.
STEP
3
■
Lights other than the above
If any of the lights listed below has burnt out, have it replaced by
your Toyota dealer.
● Headlight low beam (vehicles with LED headlights)
● Side turn signal lights
● Stop lights
● High mounted stoplight
4-3. Do-it-yourself maintenance
Remove the cover.
Insert a properly sized screw-
driver into the hole of the cover,
and pry off the cover as shown in
the illustration.
To prevent damaging the vehicle,
wrap the tip of the screwdriver
with tape.
Remove the light bulb.
4
369
Advertisement
Table of Contents
