Sapido SH106+ User Manual page 21

Sapido Technology Inc.
Step 14. There are two ways to make WiFi connection with IP Cam (IPJC2n) based on distance:
(2) Get started to make the WPS wireless (Wi-Fi) connection of IP Cam (IPJC2n) and Home
Gateway (GR267c) if they are closer to each other: Please press the WPS button on both
IP Cam (IPJC2n) and Home Gateway (GR267c) separately. When both of the lights stop
blinking, it means the connection is completed.
(3) Get started to make the WPS wireless (Wi-Fi) connection of IP Cam (IPJC2n) and Security
Alarm (WDG71n) if they are closer: Please press the WPS button on both IP Cam (IPJC2n)
and Security Alarm (WDG71n) separately. When both of the lights stop blinking, it means
the connection and encryption are completed.
Step 15. Switch your Smart Switch to "W" network mode and Plug-in. Wait for 30 seconds to
start up. When Wireless/WPS
successful.
www.sapido.com.tw
light turns to green, which means the start-up was
21
3