Quick Installation Guide
( v1.0 )
H.264 IP Cam Router
Smart Cloud Night Vision Camera with Audio Wireless Router
IPJC2n
Smart Cloud Night Vision Camera Router supports Sapido
Mobile APP to offer the real-time monitoring and security
detection. Send a push notification when intruders are detected
and trigger alarm to keep the home safe anytime everwhere.
iOS
2
2
1
3
Go to APP Store.
Complete the APP installation,
Turn on Wi-Fi → search for
Search for "Sapido" and
and Sapido icon
will show
IPJC2n WiFi signal
Download.
on smartphone desktop.
Go to Smartphone/Tablet's
Settings.
Sapido
4
5
Connect to Sapido IPJC2n WiFi network, it will pop out
Successfully connected to
the login page, please select
"Cancel"
and
"Use Without
IPJC2n.
Internet".
Sapido_IPJC2n_d12345
Sapido_IPJC2n_d12345
IPJC2n
IPJC2n
Sapido_IPJC2n_d12345
SAPIDO_IPJC2n_d12345
Step 1-1.
Hardware Content
RECORDING BUTTON
CAMERA LED
MICROPHONE
INFRARED NIGHT VISION LED
SPEAKER
WPS
Wireless/
WAN
LAN
SPEAKER
POWER
BUTTON
LED
LED
WPS LED
LED
LED
WALL MOUNT HOLE
USB FLASH DRIVE
ANTENNA
R - ROUTER MODE
A - AP MODE
W - WIRELESS AP MODE
R/A/W
VOLUME
LAN
WAN
Micro USB
RESET
MODE SWITCH
PORT
PORT
POWER PORT
Step 4.
IOT Settings
1
Find Sapido APP icon and Click
"New
IOT"
2
Please create your
"IOT
Name".
1
For example:
"My Home
Security"
3
Please enter the default password
"admin" ,
then click
Change Password
to setup your new
2
password.
IPJC2n
3
4
Click
"New
IOT" and wait for the connection.
Change password
5
You'll find the New IOT Account in APP login page.
(Green)Online
A
(Grey)Offline
A
(Red)Alert Message
B
Change Password
C
Delete IOT Account
Step 2.
Hardware Installation
1
Switch to "R" (Router) to set up as the first Router at Home.
2
Power on, the
"Wireless/
WPS"
will flash red.
3
Wait for 30 seconds till the "Wireless/WPS"
green.
6
Login the Account and Go to
"IOT Settings"
8
Enter the new device name
and click "Apply". Click "Back"
to the APP main page.
4
5
9
B C
Go to APP main page and
choose "Camera" to watch
the real-time surveillance.
Step 3.
Download APP
Android
1
1
Go to Google Play store
4
Go to Smartphone/Tablet's
Settings
and the "Power"
LED turn
7
Step 5.
Internet Settings
IPJC2n is successfully added on the list.
Choose IPJC2n and click "Rename".
Setup the internet connection to enjoy the real-time surveillance and
receive the push notificaiton on a smartphone or tablet when you are
away from the home.
1
Connect the Ethernet cable to IPJC2n's WAN port
2
Go to "Internet Settings" in APP main page,
it will automatically detect the WAN type (Internet)
3
It will direct to the setting
7
page.
For xDSL Setting, please
enter the username and
password provided by ISP.
Wireless Encryption
WPA2
is recommended with at
least 8 letters/numbers.
Click
Apply
to complete
8
the Internet Settings.
(Please remember your
WiFi Password)
5
If you don't have 3G/4G network,
please connect WDG71n Wi-Fi to
check the
Internet Settings
6
Open Sapido APP
and you'll
see the IOT account
2
3
Search for "Sapido" and
Complete the APP installation,
INSTALL
and Sapido icon will show
on smartphone desktop
Sapido
5
6
Turn on
Wi-Fi
and search for
Connect to IPJC2n
IPJC2n WiFi signal
Internet Settings
4
After the internet setup,
you'll be guided to the first
login page. You can use
smartphone 3G/4G
network to login APP and
check the Internet Settings.
New IOT
Enter The Password For "Sapido_IPJC2n_d12345"
Cancel
Enter Password
5
Password
6