Sapido SH106+ User Manual page 17

Sapido Technology Inc.
Step 4. Please tear the double-sided tape and
paste on the back of Cloud Door & Window
Sensor (DDLA0z). Then paste the DDLA0z one
part on the frame of Window, and the other
part on the Window. The interval of both
parts is no longer than 1 cm. (You can also
fasten the DDLA0z by the attached fasteners.)
Step 6.Please open the lid of the Cloud Motion Sensor (MDKA0z) and insert 2 x AAA batteries.
Before close the lid, switch the power to ON.
Step 7.When the left light
(ZigBee) of MDKA0z is
blinking, means the MDKA0z
is connecting properly with
WDG71n.
www.sapido.com.tw
Step 5.Please turn on the power. When the
ZigBee light is blinking, which means the
DDLA0z is mapping with alarm (WDG71n).
Once the Window is opened, the alarm will
start to have the alert sound.
Step 8.After fastening the MDKA0z on the hallway or gate, it
will trigger the alarm (WDG71n) if someone approaches the
MDKA0z.
17