Kenwood NX-3000 Series User Manual page 68

Indicator
Blinks when an incoming call matches your Optional Signaling.
The Vibrator function is activated. Blinks when the Vibrator is not
functioning. (NX-3200/ NX-3300 only)
A message is stored in the memory. Blinks when a new message is
received.
The VOX function is activated.
The Site Lock function is activated.
The Broadcast Call function is activated.
The Surveillance function is activated.
The System Lock function is activated.
Appears when the selected group is programmed as telephone IDs.
Blinks during Auto Telephone search.
The Tactical Zone is activated.
The Horn Alert function is activated.
(*4)
(*4) The Public Address function is activated.
The auxiliary function of a Portable transceiver (NX-3200/ NX-3300
only) or AUX A of a Mobile transceiver is activated.
(*4) AUX B is activated.
(*4) AUX C is activated.
The Lone Worker function is activated.
The OVCM function is activated.
The Activity Detection function is activated.
The Operator Selectable Tone function is activated.
Blinks during Auto Recording.
Mobile:
*1
All models supported. (For K type)
Not supported. (For E/C type)
Portable:
All models supported.
Mobile:
*2
Supported models: NX-3720G, NX-3720HG, NX-3820G, NX-3820HG only.
Portable:
Supported models: NX-3200, NX-3300 only. (For C type)
All models supported. (For K/E type)
Mobile:
*3
Supported models: NX-3720HG, NX-3820HG only.
Portable:
Supported models: NX-3200, NX-3300 only. (For C type)
All models supported. (For K/E type)
For Mobile transceivers only
*4
68
Description