Kenwood NX-3000 Series User Manual page 26

Group ID/ Channel Entry <GrpEnt>
o
In NXDN Trunking systems, press this button to enter a Group ID. In other operating
systems, this button functions the same as Channel Entry.
High Transmit Power <High>
o
Turns High Transmit Power on or off. When using a channel programmed with low
or medium power, this allows you to change the output power to high.
Home Channel <Home>
o
Press this button to jump to your home zone and channel (pre-programmed by your
dealer). If activated by your dealer, you can set your own Home Channel by selecting
your desired zone and channel using Home Channel Select.
Home Channel Select
o
Allows you to set the currently selected channel to Home Channel.
Horn Alert <HA>
o
Enables the Horn Alert terminal when a call is received. It activates the car headlights
and horn to alert you of the incoming call when you are away from the transceiver.
Individual <Indcal>
o
Refer to "Making Individual Calls" {p. 6} {p. 7} .
Individual + Short Message <Ind+SD>
o
Allows you to specify a Unit ID to send short messages.
Individual + Status <Ind+ST>
o
Allows you to specify a Unit ID to send status messages.
Key Delete <KeyDel>
o
Allows you to delete the Encryption key. Refer to "DELETING THE ENCRYPTION
KEY (AES/ DES or Enhanced Encryption only)" {p. 41} .
Language
o
Allows you to change the language of the text display on the LCD screen and the
language of the voice announcement. Refer to "MULTI LANGUAGE" {p. 45} .
LCD Brightness <Bright>
o
Allows you to adjust the brightness of the LCD backlight depending on the
surrounding lighting conditions.
Lone Worker <LoneWk>
o
Enables or disables Lone Worker function.
Low Transmit Power <Low>
o
Turns Low Transmit Power on or off. When using a channel programmed with
medium or high power, this allows you to change the output power to low.
26
*3
*3