Sony Ericsson Programming Interface Cable; Usb Cable; Software Loading; Set Up - Sony Ericsson W710 Installation Instruction, Electrical

3.9

Sony Ericsson programming interface cable

The cable is the interface between the USB programming interface (SEPI) and the
phone. A standard Sony Ericsson Mobile Communication charger, CST-60 must be
connected to the programming interface cable.
3.10

USB Cable

The A-B Plug-Plug cable is the interface between the computer and the USB
programming interface (SEPI). Connect the cable between the USB programming
interface and the computer.

4 Software Loading

4.1

Set up

General Test set up to perform SW loading. All necessary hardware for this test set up is
documented in the Mechanical or Electrical Equipment list.
USB
ACTIVATION
DONGLE
1/000 21-2/FEA 209 544/601 B
©
Sony Ericsson Mobile Communications AB
Installation Instruction, Electrical
DCU-60
CABLE
USB CABLE
PHONE
SERVICE CARD
READER
6(10)