Computer; Sony Ericsson Programming Interface - Dcu-60; Smart Card Reader/Service Card; Usb Activation Dongle - Sony Ericsson K770 Installation Instruction, Mechanical

Hide thumbs Also See for K770:

2.2 Computer

An IBM compatible computer (34) is required. The computer should include at least

three USB-ports. Refer to the Equipment List for minimum computer requirements.

2.3

Sony Ericsson programming interface – DCU-60

The cable is the interface between Computer and the phone. The DCU- 60 (POS-5)

cable should be connected to a USB-port on the computer.

NOTE!

Smart Card Reader (7)

The Smart Card Reader comes with the necessary software and instructions for

installation.

1. Connect the Smart Card Reader (7) to one of the USB ports on the computer (34).

2. Install Service Card (8) into the Smart Card Reader (7).

A USB Activation Dongle is required for activation in EMMA III. Refer to the EMMA III

Homepage available from CSPN, for installation instructions.

An RS-232 or USB type Infrared adapter (POS-44) may be used to verify the Infrared

function in the phone. Install according to the manufacturer's instructions.

1/00021-1/FEA 209 544/142 A

Company Internal

Sony Ericsson Mobile Communications AB

The Smart Card Reader/Service Card is only needed for the CSCA

(Customer Services Customization Activation) service and for all services

when running EMMA III off-line.

Installation Instructions, Mechanical

Service Card (8)

3(6)

Table of Contents