Advertisement
CURLING
1.
Feed a section of hair through the split barrel until its between the
ceramic plates. The styler should be positioned at the top of your
head, near the crown.
2.
Holding the styler at approximately a 45° angle to the section of
hair, begin slowly rotating the styler so your hair passes through the
ceramic plates and wraps around the curling surface (rotating towards
your head). Continue rotating the styler until the entire section of hair
has passed through the ceramic plates.
3.
Release the hair at the bottom and twirl the section of hair into a curl
with your fingers.
4.
Repeat on remaining sections.
WAVES
1.
Feed a section of hair through the split barrel until its between the
ceramic plates. The styler should be positioned at the top of your
head, near the crown.
2.
Rotate the styler 180° away from the head and hold in place for
several seconds. The hair should be taut across the edge and top of
the curling sleeves during this step.
3.
Turn the styler back to center and move down the strand of hair about
2.5cm.
4.
Rotate the styler 180° towards your head and hold in place for several
seconds. The hair should be taut across the edge and top of the
curling sleeves during this step.
5.
Turn the styler back to center and move down the strand of hair.
Repeat the rocking motion, alternating directions down the section of
hair.
6.
Repeat on remaining sections.
6
Advertisement
