Zte Prestige 2 User Manual page 216

Enable Notification when Open Networks Are Available: From Wi-Fi settings, tap Menu
n
> Advanced and tap the Network notification slider.
The setting is available when Wi-Fi is turned on.
l
Tap Network notification to turn the option on or off.
l
Allow Some Services to Scan for Networks even when Wi-Fi is Off: From Wi-Fi settings,
n
tap Menu > Advanced and tap the Scanning always available slider.
Tap Scanning always available to turn the option on or off.
l
Allow Automatic Connection to Passpoint-certified Wi-Fi Access Points: From Wi-Fi
n
settings, tap Menu > Advanced and tap the Passpoint slider.
Set Timing for Pausing a Connection: From Wi-Fi settings, tap Menu > Advanced >
n
Keep Wi-Fi on during sleep and then select a setting.
Install Certificates for Secured Wi-Fi Networks: From Wi-Fi settings, tap Menu >
n
Advanced > Install certificates and then select the file to install.
Use Wi-Fi Direct: From Wi-Fi settings, tap Menu > Advanced > Wi-Fi Direct.
n
The setting is available when Wi-Fi is turned on.
l
For more information, see Wi-Fi Direct.
l
Use WPS to Connect to a Wi-Fi Network: From Wi-Fi settings, tap Menu > Advanced >
n
WPS Push Button or WPS Pin Entry.
The settings are available when Wi-Fi is turned on.
l
If you tap WPS Push Button, press the WPS button on the access point and the access
l
point will recognize your phone and add it to the network.
If you tap WPS Pin Entry, enter the PIN number displayed on the phone into the access
l
point's setup page. Your phone automatically finds the access point and configures the
connection.
Note: For detailed information about the WPS feature of the access point, please refer to its user
documents.
Check MAC Address: From Wi-Fi settings, tap Menu > Advanced.
n
MAC Address appears below "MAC address."
l
Check IP Address: From Wi-Fi settings, tap Menu > Advanced.
n
IP Address appears below "IP address."
l
Settings Connections Settings 207