Programming; Enter Installer Programming Mode - Honeywell Lyric LCP500-LC Installation And Reference Manual

Lyric Controller Installation and Reference Guide
Mechanics of Programming Mechanics of Programming (Continued
Mechanics of Programming Mechanics of Programming

Programming

Programming Programming Programming
If the system is Armed or in Alarm, the Tools icon will not be functional. The system must first If the system is Armed or in Alarm, the Tools icon will not be functional. The system must first
If the system is Armed or in Alarm, the Tools icon will not be functional. The system must first If the system is Armed or in Alarm, the Tools icon will not be functional. The system must first
be disarmed. be disarmed. be disarmed. be disarmed.
E E E E nter Installer Programming Mode nter Installer Programming Mode nter Installer Programming Mode nter Installer Programming Mode
SCREEN SCREEN
SCREEN SCREEN
System Standby!
12:00PM
December 31, 2014
Security
Smart Scenes
System Standby Screen System Standby Screen
System Standby Screen System Standby Screen
System Programming...
Installer Code
Date Time
Zones
Keys
Sounder
Installer Tools Menu Screen Installer Tools Menu Installer Tools Menu Installer Tools Menu
(Continued) ) ) )
(Continued (Continued
Automation Video
Notices Settings
lyric-037-V1
System Type
Communicator
Comm Diagnostics
Reporter
System Settings
lyric-026-V0
Screen Screen Screen
1. Power-up the controller and allow it to "boot-up".
"System Standby" is displayed on the touch screen.
When the "boot-up" is complete (approximately 1-2
minutes) "Ready to Arm" is displayed.
2. Select the "Security" icon.
3. Select "Tools" icon.
4. Enter the Installer Code 4112 on the displayed
keypad.
5. The Installer Tools menu screen appears. Select the
"Program" button. "System Programming..." is
displayed and the "Panic" button is lit and the
"Home" button alternately flashes red and green.
6. Select one of the following options:
Installer Code
Date Time
Zones
Keys
Sounder
Use the down " " arrow to scroll to the next page
of options.
Default Config.
Reset Master Code
RF Keypad
7. The system advances to the Programming screen
for the selected option.
* This programming field may not be available with the
system being installed.
- 18 -
ACTION ACTION
ACTION ACTION
System Type
Communicator
Comm. Diagnostics
Reporter
System Settings
Z-Wave
Language*