Changing The Main Fuse (Tx 300) - Husqvarna TC 250 Owner's Manual

14.4

Changing the main fuse (TX 300)

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing
under the seat.
Finishing work
–
Install the battery.
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. (
Main work
–
Pull starter relay
E00308-10
14 ELECTRICAL SYSTEM
( p. 111)
p. 67)
p. 69)
while the engine is idling until
p. 68)
p. 66)
1
from the holder.
113