Ethernet Cable & Rs-232 Pinouts - QSC CM16a Hardware Manual

Section 6:
Appendix- Ethernet Cable Pinouts
ETHERNET CABLING
This diagram shows the pinout for standard unshielded twisted-pair (UTP) network cable . Both ends of the cable are wired
identically.
A crossover cable has the RX and TX wire pairs switched around at one end. There are only two likely situations that would require a
crossover cable: to connect a single system controller computer directly to a single CM16a device; and to cascade hubs that don't have uplink
ports.
RS-232 Null Modem Cable Pinout
RJ-45 pinout for standard Ethernet
patch cable (both ends identical )
RJ-45 pinout for an Ethernet
crossover cable
37