QSC CM16a Hardware Manual page 28

Section 3:
Operation- Serial Port I/O Interface
3)
After starting Hyper Terminal, a Connection Description window will
pop-up. It will require that you name your connection.Enter a name for your
new connection (example: CM16a ) and click OK to continue.
4)
Next, Hyper Terminal needs to know how to "talk" to the CM16a. This
selection depends on which port on your PC the null-modem cable is
connected.
Ignore the first three entry fields (phone number information) and go directly
to the " Connect using: " entry field and click on the down arrow for the drop-
down menu selection.
Select the appropriate port (COM1 is used in this example) and click OK
continue. The Properties window should appear next.
5)
The Properties window for the selected COM port should now be active.
It should be similar in appearance as the example to the right.
For the Port Settings, use the following information so that commu-
nication between the CM16a and the computer is in the same "language".
Bits per Second
Data Bits
Parity
Stop Bits
Flow Control
Once you have set the properties as outlined, click OK to continue.
If all the connections and communications settings are correct, the main
Hyper Terminal window will appear next (see next page).
28
9600
8
none
1
Xon/Xoff