Step 5
Click Configure and set up COM port parameters as follows:
Step 6
Click OK to continue. Set the two DIP switches of the SNMP IPv6 to the
ON position (Configuration Mode), and HyperTerminal will automatically
connect to the SNMP IPv6. If it does not connect, click the telephone icon
from the tool bar. When connection is established, log in with Administra-
tor's account/ password (default: admin/ password, case sensitive). Once
you are logged in, the Main Menu appears on the screen. Please refer to 4-5
Configuring via Text Mode for more information.
InsightPower SNMP IPv6 for PDC
1 4