Lockout Feature Use - QSC DSP-30 Hardware Manual

Use:
LOCK OUT Feature
TO LOCK THE FRONT PANEL BUTTONS (Browse and Accept pushbuttons)-
1-
Press the Accept button and hold it down for at least three seconds.
2-
The "lock" indicator will illuminate.
3-
The Browse button is disabled.
FRONT PANEL DISPLAY-
Example shows Preset 7 in
"unlocked" and "locked" state.
TO UNLOCK FRONT PANEL BUTTONS-
1-
Press and hold the Accept button for at least three seconds.
2-
The Lock indicator will extinguish.
3-
The Browse button is enabled.
UNLOCKED
Note: When the PC is communicating with the DSP-30, the LOCK INDICATOR will occasionally illuminate.
This is normal and prevents commands from both the front panel and PC from interfering with one another.
Press the Accept button and hold
for three seconds to lock/unlock the
preset selection.
LOCKED
LOCK INDICATOR
illuminated when
locked
17