Equipment Check; Determine Operation Area - Echo SHC-2401 Operator's Manual

Shaft hedge clipper
Table of Contents

Advertisement

Storage –
Fuel storage laws vary by locality. Contact your local government for
the laws affecting your area. As a precaution, store fuel in an approved,
air tight container. Store in a well ventilated, unoccupied building, away
from sparks and flames. Do not store fuel longer than 30 days.
IMPORTANT
Stored fuel ages. Do not mix more fuel than you expect to use in
thirty (30) days, ninety (90) days when a fuel stabilizer is added.
IMPORTANT
Stored two-stroke fuel may separate. ALWAYS shake fuel con-
tainer thoroughly before each use.

EQUIPMENT CHECK

Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
• Check that the blade assembly is firmly attached and in safe operating
condition. Dull, loose or damaged blades should not be used.

DETERMINE OPERATION AREA

WARNING
Inspect starting area for hazards such as rocks, glass, debris etc.
which could be thrown by the cutting attachment when starting.
Keep helpers and bystanders at least 15m (50 ft) from starting area,
otherwise serious personal injury may result.
• Spectators and fellow workers must be warned, and children and
animals prevented from coming nearer than specified in the attach-
ment Operator's Manual or Safety Manual. If unsure keep people
and pets away 15 m (50 ft.).
DANGER
S
H
C
HAFT
EDGE
O
'
M
PERATOR
S
S
M
T W T
1
2
3
4 5
8
9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31
15 M
(50 FT.)
LIPPER
15
ANUAL
F
S
6
7

Advertisement

Table of Contents
loading

Table of Contents